In depth
Inside a Havana cigar factory: people, process and the reader on the platform
Walk into a Havana cigar factory and what you notice first is the sound: a low murmur of voices, the tap of cutting boards, and sometimes a voice reading aloud from a raised platform. What you see are rows of workers rolling cigars by hand at wooden benches. This guide explains how a factory is organised, what each job involves, why the work is considered a craft, what the tradition of the lector means, and what a visitor can expect on a factory tour.
From leaf store to finished cigar
A factory receives tobacco that has already been cured, fermented and sorted. In the leaf store, bales are opened and moistened so that the leaves are supple enough to handle. Workers called despalilladores remove the central vein of each leaf, a task that requires a quick hand to avoid tearing, and the leaves are sorted again by size and colour. Blenders then decide on the combination of leaves for each brand and size, according to a recipe that ensures consistency.
The prepared leaves go to the rolling room, where the cigars are made. Afterwards they are inspected, graded by colour, laid to rest in drying rooms, and then banded and packed. At each point there are checks, and cigars that do not meet standards are set aside. The whole chain may involve dozens of people for each batch.
The torcedor
The torcedor, or roller, is the figure at the centre of the factory. Training takes months or years, and the roller moves through categories of increasing difficulty as skills improve. Each roller is expected to produce a number of cigars a day according to the size, and quality is checked by supervisors who test the draw, weight and appearance. The best rollers handle the largest and most complicated shapes.
A roller works with few tools: a board, a flat knife called a chaveta, a pot of vegetable glue and a guillotine to cut the cigar to length. The filler leaves are gathered into a bunch and wrapped in the binder, then pressed in a wooden mould to give shape. Afterwards, the roller applies the wrapper by cutting it to shape from a whole leaf, then spiralling it around the bunch, and finishing the head with a small circular cap. It is slow, precise work.
The lector
One of the most famous traditions of Cuban cigar factories is the lector, a reader employed by the workers, who sits on a platform and reads aloud during the working day. The practice began in the 1860s in a Havana factory and spread throughout the industry. Readers began with newspapers and later read novels and other works, with the workers choosing what was read and paying a share of the reader's wages.
The custom is credited with helping educate generations of cigar workers, and the names of some famous novels were given to cigar brands and shapes because of the popularity of the readings. Colonial authorities sometimes tried to ban the practice because they feared the political effect of the news and ideas it spread. The tradition continues in some factories today.
Famous factories
Several of Havana's factories are historic buildings. The Partagás factory, behind the Capitolio, has operated for more than a century and a half and offers visits. The Romeo y Julieta and other houses were associated with large premises in the city centre. The El Laguito factory, in the Miramar district, was created in the 1960s to produce a particular brand and was set in a former mansion. The names and locations of the factories and the brands they make have changed over time.
Visitors should check the current status of any factory tour, since some premises have been closed for renovation or reorganisation. Tours are usually available through hotels and agencies, and some factories ask for advance bookings.
Working conditions and wages
The cigar industry is a state sector, and workers are employed by state companies. Incomes are paid in the national currency and may include production bonuses. As in much of the Cuban economy, salaries are modest by international standards, though the status of the skilled roller is high. Reporting on conditions is published by the government and by outside journalists and researchers, and a reader should consult several sources for a full picture.
Visiting responsibly
A tour is a chance to see the craft up close, but it is also a workplace. Visitors are usually asked not to take photographs of workers without permission and to keep to the marked route. Buying cigars from official shops attached to the factories gives some assurance of origin, but prices are not negotiable and the same caution about authenticity applies as elsewhere. Remember that rules on importing cigars to your own country may restrict what you can take home.
The art of the band and the box
A cigar band, the paper ring that identifies the brand, is a nineteenth-century invention, and the earliest were created to help smokers keep their gloves clean and to show which manufacturer made the cigar. Over time bands became miniature works of lithography, with coats of arms, medals and ornate lettering that signalled quality. Collectors still hunt for old bands, and designers use their style in other products.
Boxes, too, were once decorated with elaborate labels printed in many colours. The lithographed labels of the late nineteenth century, produced in Havana and abroad, show landscapes, portraits and allegories. Today's boxes are plainer but follow traditions of design, and the cedar interior continues to give a signature aroma.
Sorting for colour
After rolling, cigars are sorted by shade of the wrapper. Specialists group them into many tones, so that the finished box looks even from one end to the other. The sorting is done by eye, in natural light, and demands experience. A box that appears in two different colours would be considered poorly finished, even if the cigars taste excellent. This attention to appearance shows how seriously the industry takes presentation.
After sorting, cigars rest for a time in climate-controlled rooms so that moisture and aroma settle before being boxed. Some factories keep a stock of finished cigars for weeks to ensure that they are in condition before shipment.
Women and families in the trade
The cigar industry has been shaped by the people who work in it, and women have been central, especially in sorting, stripping and banding. In the twentieth century, women began to enter the rolling rooms in larger numbers, and many factories now have majority female workforces. Families often pass skills from one generation to the next, and the neighbourhoods around the old factories have a tradition of cigar workers.
The sector has also been a school for organised labour. Cigar workers formed some of the earliest unions in Cuba and in the Cuban communities in Florida, and their readings and meetings played a role in the independence movement.
Seeing a factory with open eyes
A visit to a factory can be absorbing, but it helps to know what to look for. Notice the order of the work: leaves stripped, bunches assembled, cigars rolled, cut, checked, sorted and banded. Watch the rollers' hands and the speed at which they work. Listen to the reader if there is one. Ask the guide how long training takes. And remember that tobacco use carries risks, so a fascination with the craft does not need to lead to smoking.
A glossary of cigar-factory jobs
Cigar factories employ people in many roles. Despalilladores strip the stem from leaves. Escogedores sort leaves by colour and quality. Torcedores roll cigars. Boncheros make the bunch of filler and binder. Rolleros apply the wrapper. Anilladores put on the bands. Escogedores de color sort finished cigars. Empacadores pack boxes. Catadores taste samples for quality. Each role has its own skills, and a worker may progress from one to another. Knowing the names helps visitors to follow what they see.
Seasonal rhythm of the factories
Factories work year-round, but the supply of leaf and the demand for cigars follow a cycle. After the harvest and curing, leaf is fermented and aged, so rollers have plentiful material in some months and less in others. Orders from distributors peak before holidays and trade events. Production is planned in advance, and training of new rollers is scheduled around the cycle. Visitors may notice differences in activity depending on the time of year.
The rhythm ties the factory to the countryside, and the health of one depends on the other.
Common questions
- What does a torcedor do?
- A torcedor, or roller, makes cigars by hand from filler, binder and wrapper leaves.
- What is a lector?
- A reader who reads aloud to the workers during the day, a tradition begun in the 1860s.
- Can I visit a factory?
- Some factories offer visits, but access changes. Check current arrangements through your hotel or an agency.
- Where is the Partagás factory?
- Behind the Capitolio in central Havana.
- Do you sell cigars or tours?
- No. This page is information only.
- Do rollers get paid by the cigar?
- Arrangements have varied over time and between factories. Production targets and bonuses for quality have been part of pay systems. Details are set by the employing enterprise and labour rules, so published sources and the enterprise itself are the reliable references.
- Can I buy cigars at the factory?
- Factories that receive visitors usually have an official shop on site or nearby, selling boxes with receipts. Availability and prices vary, and the same caution about authenticity applies away from official shops.
- How long does it take to learn to roll?
- Training takes months to years. Apprentices begin with simpler tasks and shapes and move to more complex ones as they gain skill. Expert rollers can produce a large number of uniform cigars a day, which is the result of long practice.
Official sources and where to go next
Links open the publisher's own site. CubaAtlas does not operate, sell, book or clear anything and earns nothing from these links.